有关SVN,折腾的有点多了,以前博客写过《关于svn布署小记——生命不息,折腾不止》,不过后来由于服务器的崩溃,原有文章也不复存在了,以后在补吧。
环境:服务器Centos7,宝塔环境
1.进入svn目录,建立版本库;
svnadmin create svntest #svntest为svn项目名称2.在 hooks/ 目录下复制 post-commit 文件 【钩子脚本】或者复制原有的post-commit.tmpl复制一份,去掉.tmpl,内容如下:
#!/bin/sh
REPOS="$1"
REV="$2"
TXN_NAME="$3"
WEB=/www/wwwroot/这是你的项目网站目录
export LANG=en_US.UTF-8 #注意你的格式UTF-8
svn update $WEB --username 用户名 --password 密码 #此处设置默认账号的用户名密码设置权限钩子必须设置成可执行的
3.在 conf/ 目录下打开 passwd 文件(配置用户密码),内容如下:
### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.
[users]
用户名=密码 #用户名 = 密码是格式,注意此处与上一步 username 后的用户名, password 后的密码相同 授权钩子用户
xxx2=12345
xxxx3=12345
xxx4=1231231234.在 conf/ 目录下打开 authz 文件(配置权限),内容如下:
### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
### - a single user,
### - a group of users defined in a special [groups] section,
### - an alias defined in a special [aliases] section,
### - all authenticated users, using the '$authenticated' token,
### - only anonymous users, using the '$anonymous' token,
### - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').
[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average
[groups]
zhanghao = 用户名,用户名2,用户名3,用户名4……
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe
[/]
@zhanghao =rw
# [/foo/bar]
# harry = rw
# &joe = r
# * =
# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r5.在 conf/ 目录下打开 svnserve.conf 文件(配置文件),内容如下:
### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository. (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)
### Visit http://subversion.apache.org/ for more information.
[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
# anon-access = read
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file. Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control. Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file. If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa. The default realm
### is repository's uuid.
realm = 此处请填你的SVN库真实目录
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above. Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none
[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 2566.进入目录,去web目录取出svntest,也就是钩子文件里填写的地方,如:/www/wwwroot/这是你的项目网站目录
svn checkout svn://IP地址/svntest
至此服务器svn项目建立完毕,去PC端检出目录
版权声明:武志红将《宝塔环境在已部署svn 服务器上,再搭一个SVN项目》原创发表于『武志红的杂货铺』,链接地址:https://www.imwzh.com/archives/13.html。本站内容仅为个人生活杂记,谢绝任何形式的转载。